SN74AHC595DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC595DBR Overview
In package 16-SSOP (0.209, 5.30mm Width), there is an embedded device. There are 16 terminations on the chip. Tape & Reel (TR) is the case in which it is packed. Parts with a 3.3V operating supply voltage are specified. 16 pins are available on the device. The recommended mounting method is Surface Mount. There is an electronic component in the AHC/VHC/H/U/V. As you can see, this component is mounted in the way of Surface Mount. It is important to note that the operating temperature range is -40°C~125°C. Votage within 2V~5.5V is supplied. This electrical component belongs to the 74AHC series. Based on the 74AHC595 family, you can search for similar parts. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. As far as the device is concerned, there are 1 input lines available. Devices with voltage delivery capabilities of 2/5.5V are available. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. There are 9 output lines to operate. TR is the way the part is packaged.
SN74AHC595DBR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
It supplies 2/5.5V power
With 9 output lines
Packing Method : TR
SN74AHC595DBR Applications
There are a lot of Texas Instruments SN74AHC595DBR Shift Registers applications.
- Parallel to serial converter
- Cache memory in CPU
- Pulse Extenders
- 7-segment display control
- data transfer
- LED matrix control
- 8-bit data storage
- Data Format Converters
- Data manipulation
- Flash Memory