SN74AHC574DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 16.7 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC574DWG4 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74AHCseries of FPGAs. This D flip flop should not have a frequency greater than 115MHz. The list contains 1 elements. It consumes 4μA of quiescent It has been determined that there have been 20 terminations. The 74AHC574family includes it. It is powered by a voltage of 3.3V . This JK flip flop has a 3pFfarad input capacitance. AHC/VHC/H/U/Vis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. There are 8bits in its design. Vsup reaches 5.5V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. To achieve this superior flexibility, 8 circuits are used. In order for the device to operate, it requires 2/5.5V power supplies. This flip flop has a total of 2ports. As a result of its output current of 8mA, it is very flexible in terms of design.
SN74AHC574DWG4 Features
Tube package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC574DWG4 Applications
There are a lot of Texas Instruments SN74AHC574DWG4 Flip Flops applications.
- Storage registers
- Differential Individual
- Cold spare funcion
- ESD protection
- CMOS Process
- Convert a momentary switch to a toggle switch
- Set-reset capability
- Computers
- Functionally equivalent to the MC10/100EL29
- Data transfer