SN74AHC374DGVRE4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
SN74AHC374DGVRE4 Overview
20-TFSOP (0.173, 4.40mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 2V~5.5V is required for operation. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74AHC series. It should not exceed 120MHzin terms of its output frequency. D latch consists of 1 elements. There is a consumption of 4μAof quiescent energy. Terminations are 20. The 74AHC374family includes it. It is powered from a supply voltage of 3.3V. Input capacitance of this device is 4pF farads. It belongs to the family of electronic devices known as AHC/VHC/H/U/V. Surface Mount mounts this electronic component. It is designed with 20 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. 5.5Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. A reliable performance of this D flip flop makes it well suited for use in TR. A power supply of 2/5.5Vis required to operate it. The flip flop has 2embedded ports. The output current of 8mA makes it feature maximum design flexibility. A total of 3input lines have been provided.
SN74AHC374DGVRE4 Features
Tape & Reel (TR) package
74AHC series
20 pins
2/5.5V power supplies
SN74AHC374DGVRE4 Applications
There are a lot of Texas Instruments SN74AHC374DGVRE4 Flip Flops applications.
- Asynchronous counter
- ESD performance
- Patented noise
- EMI reduction circuitry
- 2 – Bit synchronous counter
- Balanced Propagation Delays
- Clock pulse
- Instrumentation
- Shift registers
- Guaranteed simultaneous switching noise level