SN74AHC174DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC174DBR Overview
16-SSOP (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Cut Tape (CT)package. T flip flop is configured with an output of Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74AHCseries FPGA. It should not exceed 180MHzin its output frequency. A total of 1elements are contained within it. As a result, it consumes 4μA quiescent current. A total of 16terminations have been recorded. Members of the 74AHC174family make up this object. The power source is powered by 3.3V. JK flip flop input capacitance is 1.7pF farads. This D flip flop belongs to the family of AHC/VHC/H/U/V. It is mounted by the way of Surface Mount. It is designed with 16 pins. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 7 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. The D latch operates on 2/5.5V volts. With an output current of 8mA, this device offers maximum design flexibility. Currently, there are 3 lines of input.
SN74AHC174DBR Features
Cut Tape (CT) package
74AHC series
16 pins
2/5.5V power supplies
SN74AHC174DBR Applications
There are a lot of Texas Instruments SN74AHC174DBR Flip Flops applications.
- Reduced system switching noise
- Shift registers
- Divide a clock signal by 2 or 4
- ESD performance
- Cold spare funcion
- Count Modes
- Clock pulse
- Test & Measurement
- EMI reduction circuitry
- Matched Rise and Fall