SN74AHC16373DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74AHC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.008 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC16373DGVR Overview
A package called 48-TFSOP (0.173, 4.40mm Width) contains it. A Cut Tape (CT) package is used to package it. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 2V~5.5V. The operating temperature is -40°C~85°C. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 16 bits. A device with this design has 48 terminations. The family 74AHC16373 includes it. It operates with a supply voltage of 3.3V. The device is equipped with 48 pins. In terms of electronic devices, this one is in the AHC/VHC/H/U/V family. There are 48 pins on it. Electronic parts are mounted using the Surface Mount method. 2 ports are available on this device. There is a subcategory of FF/Latches for this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. It is recommended to have a higher supply voltage (Vsup) than 2V. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is appropriate for TR. The binary equivalent of the input line is generated by 1 output lines. In total, it has 2 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AHC16373DGVR Features
48-TFSOP (0.173, 4.40mm Width) package
74AHC series
16 Bits
74AHC16373 family
48 pin count
48 pins
2 elements
SN74AHC16373DGVR Applications
There are a lot of Texas Instruments SN74AHC16373DGVR Latches applications.
- Serial Input
- Pattern Generators
- BCD counting
- Clocks
- Pattern generators
- Display driver
- Shift right register
- Avionics
- Bus system register with enable parallel lines at bus side
- Shift register