SN74ACT7805-40DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT7805 |
| Function | Synchronous |
| Current - Supply (Max) | 400μA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 4.5K 256 x 18 |
| Clock Frequency | 25MHz |
| Access Time | 20ns |
| Data Rate | 25MHz |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Standby Current-Max | 0.0004A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ACT7805-40DLR Overview
You can find FIFO memory chip in package 56-BSSOP (0.295, 7.50mm Width) .In terms of packaging, it comes in Tape & Reel (TR) cases.Apps and data can be stored in the 4.5K 256 x 18 memory of the FIFO chip.Reliable operation requires a temperature of 0°C~70°C .It is mounted in the Surface Mount position.Operation is based on a supply voltage of 4.5V~5.5V .A component in the 74ACT series, this is an memory logic.There is a FIFO's maximum operating supply current of 400μA .It is pointing in the direction of Surface Mount .Memory IC belongs to the family of 74ACT7805 .When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 56 terminations.The operation pins are 56 pins.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Normally, 5V power supplies are owned by the component.There is a FIFO memory IC's maximum supply voltage of 5.5V .As a general rule, keep the supply voltage (Vsup) above 4.5V in order to ensure normal operation.There is 25MHz frequency set for the clock of the FIFO memory IC.
SN74ACT7805-40DLR Features
4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7805
FIFOs category
Clock frequency of 25MHz
SN74ACT7805-40DLR Applications
There are a lot of Texas Instruments SN74ACT7805-40DLR FIFOs Memory applications.
- Data-acquisition systems
- Seismic Data Collection at Extreme Temperatures
- Computers
- Notebook
- Firmware loaders
- Test Equipment
- IP Radio
- Event Recorder
- Character generators
- Laser Receiver System