SN74ACT7805-15DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 66.7MHz |
| Base Part Number | 74ACT7805 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 256 x 18 |
| Element Configuration | Dual |
| Max Supply Current | 400μA |
| Access Time | 12ns |
| Data Rate | 67MHz |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ACT7805-15DLR Overview
This package is included in 56-BSSOP (0.295, 7.50mm Width) .The package comes in a case of Cut Tape (CT) .Data and applications can be stored in the FIFO chip's 4.5K 256 x 18 memory.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.Mounting type Surface Mount indicates that the FIFO memory is mounted.A supply voltage of 4.5V~5.5V is required for its operation.It is a component from the 74ACT series.It is pointing in the direction of Surface Mount .The 74ACT7805 family of objects contains it.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains a total of 56 terminations.56 pin is used for operation.In order to operate FIFO design, a maximum current of 400μA is required.In order to maximize efficiency, the supply voltage should be set to 5V .In FIFOs , this gadget is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.A frequency of 66.7MHz is sufficient to maintain good accuracy.In normal circumstances, the component has 5V power supplies.By using 2 circuits, FIFO memory chip has greater flexibility.
SN74ACT7805-15DLR Features
4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7805
FIFOs category
SN74ACT7805-15DLR Applications
There are a lot of Texas Instruments SN74ACT7805-15DLR FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Data-acquisition systems
- Computers
- Laser Receiver System
- IP Radio
- PC peripheral
- Transistors
- Programmable Logic Controller
- Smart Meter
- Medical Monitoring Device