SN74ACT573PW
| Parameters | |
|---|---|
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
SN74ACT573PW Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tube. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. There is -40°C~85°C operating temperature. 74ACT is the series number of this FPGA. The electronic part in this image has 8 bits. In this device, there are 20 terminations. It is a member of the 74ACT573 family. It operates with a supply voltage of 5V. There are 20 pins attached to it. ACT is the family name of this electronic device. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. There are 8 input lines in which electronic circuits are present. Its 24mA output current allows for maximum design flexibility. High efficiency requires a supply voltage of 5V. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74ACT573PW Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573PW Applications
There are a lot of Texas Instruments SN74ACT573PW Latches applications.
- Counter timers
- Automotive Body Electronics
- Decade counting
- Serial Output Register
- Relay
- Parallel-to-Serial Data Conversion
- Parallel data storage
- Serial Input
- Shift register
- Shift right register