SN74ACT373NSR
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
SN74ACT373NSR Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It is -40°C~85°C at the operating temperature. 74ACT is the series number of this FPGA. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74ACT373 family. The device works with a voltage of 5V for its supply voltage. 20 pins are included. ACT is the family of this electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. It operates from 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TR. Due to its 24mA output current, it offers maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.
SN74ACT373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
SN74ACT373NSR Applications
There are a lot of Texas Instruments SN74ACT373NSR Latches applications.
- Counters
- Automotive Body Electronics
- Parallel Input
- Up-Down Johnson
- Automatic test equipment
- Relay replacement
- Stacked or Push-Down Registers
- Serial Output Data Queuing
- Synchronous frequency dividers
- Avionics