SN74ACT2235-20FN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | BYPASS-XCVR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| JESD-30 Code | S-PQCC-J44 |
| Function | Asynchronous |
| Current - Supply (Max) | 400μA |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 18K 1K x 9 x 2 |
| Access Time | 25ns |
| Data Rate | 50MHz |
| Organization | 1KX9 |
| Memory Width | 9 |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Bi-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SN74ACT2235-20FN Overview
You can find FIFO memory chip in the 44-LCC (J-Lead) package.The package comes in a case of Tube .There is a 18K 1K x 9 x 2 MB memory on the FIFO chips, which can be used to store both applications and data.It is recommended that the temperature be regulated to 0°C~70°C to ensure reliable operation.Surface Mount is the mounting type of the FIFO memory.To operate, the FIFO products requires a voltage supply of 4.5V~5.5V .The 74ACT series contains this memory logic.In this case, the FIFO's maximum supply current is 400μA .FIFO's FIFO's maximumIf the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 44 terminations.With the help of this FIFO memory, BYPASS-XCVR can also be generated.As a result, Vsup is set at 5.5V (FIFO memory IC's maximum voltage supply).As a general rule, keep the supply voltage (Vsup) above 4.5V in order to ensure normal operation.
SN74ACT2235-20FN Features
18K 1K x 9 x 2 memory size
74ACT series
SN74ACT2235-20FN Applications
There are a lot of Rochester Electronics, LLC SN74ACT2235-20FN FIFOs Memory applications.
- A/D output buffers
- HDD
- Industrial Systems
- Character generators
- GPS Offender Tracking
- Optical memories
- Emulators
- Wireless
- Microprogramming
- IP Camera Buffer