SN74AC563PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC563PWR Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). The package is in the form of Cut Tape (CT). In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2V~6V. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. A device such as this has 20 terminations designed. The family in which it belongs to is 74AC563. It operates with a supply voltage of 3.3V. 20 pins are available on it. This electronic device belongs to the family of AC. The device has 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. Vsup reaches 6V as the maximum supply voltage. (Vsup) should be greater than 2V. An electronic circuit can be found on 3 input lines. Based on its reliable performance, this device is appropriate for TR. As the output current is 24mA, the design flexibility is maximum.
SN74AC563PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
SN74AC563PWR Applications
There are a lot of Texas Instruments SN74AC563PWR Latches applications.
- Shift right register
- Parallel Output
- Address register
- Automotive HEV/EV Powertrain
- Clocks
- Buffer Storage
- Counting
- Parallel data storage
- Counter
- Pattern Generators