SN74AC563N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74AC563 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 4.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC563N Overview
Package 20-DIP (0.300, 7.62mm) includes it. This package has the format of Tube. There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Through Hole method. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. It is a type of FPGA belonging to the 74AC series. It is designed with 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74AC563 family, it falls under that category. It operates with a supply voltage of 3.3V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the AC family. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Through Hole method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. There is a maximum voltage supply (Vsup) that reaches 6V. There are 3.3/5V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 8 input lines. Due to its 24mA output current, it offers maximum design flexibility. There are also other characteristics of it, such as BROADSIDE VERSION OF 533.
SN74AC563N Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC563N Applications
There are a lot of Texas Instruments SN74AC563N Latches applications.
- Parallel Output
- Display
- Automotive Cluster
- Flip-flops
- Stacked or Push-Down Registers
- Sample and hold register
- Shift left register
- Shift left with parallel loading
- Audio and video switching
- Digital bus buffer