SN74AC563DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AC563DWRE4 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. In its configuration, Tri-State is used as the output. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A voltage of 2V~6V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74AC series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 8 bits. In this device, there are 20 terminations. The family in which it belongs to is 74AC563. With a supply voltage of 3.3V, it operates. The 20 pind are equipped with it. This electronic device belongs to the family of AC. The pin configuration of the device is 20. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. A total of 3.3/5V power supplies are required for it to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is suitable for TAPE AND REEL. 8 output lines provide binary equivalents of input lines. It also has characteristics of BROADSIDE VERSION OF 533.
SN74AC563DWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC563DWRE4 Applications
There are a lot of Texas Instruments SN74AC563DWRE4 Latches applications.
- Counting
- Parallel-to-Serial Data Conversion
- Parallel Output
- Timers
- Shift right with parallel loading
- Up-Down Johnson
- Display
- Display driver
- Four-bit storage with output enable
- High-speed logic