SN74AC563DWR
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
SN74AC563DWR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. It operates at a voltage of 2V~6V. It operates at -40°C~85°C degrees Celsius. An FPGA of this type belongs to the 74AC series. Electronic parts with 8 bits are designed for this application. As far as this device is concerned, it has no terminations. It is a member of the 74AC563 family. The device works with a voltage of 3.3V for its supply voltage. The device is equipped with 20 pins. In terms of electronic devices, this one is in the AC family. The device has 20 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. This part can be found within the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. There is 3.3/5V power supply for it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Based on its reliable performance, this device is well suited to TAPE AND REEL. There are 8 output lines that correspond to the binary equivalents of the input line. There is also BROADSIDE VERSION OF 533 characteristics to it.
SN74AC563DWR Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC563DWR Applications
There are a lot of Texas Instruments SN74AC563DWR Latches applications.
- Automotive Body Electronics
- Multi-line decoders
- BCD counting
- Buffer/Storage Registers
- A/D and D/A conversion
- Parallel data storage
- Parallel Input
- Frequency dividing
- Parallel data storage
- Serial Output Register