SN74AC533PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC533PWRE4 Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. A package of Tape & Reel (TR) has been used. The output it is configured with uses Tri-State. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 2V~6V. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74AC series. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. It belongs to 74AC533 family. With the supply voltage set at 3.3V, it is able to operate. 20 pins are available on it. In the world of electronics, this electronic device belongs to the family of AC. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. This part is included in FF/Latches. It reaches 6V when the supply voltage (Vsup) reaches maximum. There are 3.3/5V power supplies required for this machine to operate. (Vsup) should be greater than 2V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is suitable for TAPE AND REEL. The 24mA output current gives it maximum design flexibility.
SN74AC533PWRE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC533PWRE4 Applications
There are a lot of Texas Instruments SN74AC533PWRE4 Latches applications.
- Automotive Cluster
- Shift left with parallel loading
- PCs and Notebooks
- Four-bit storage with output enable
- Sample and hold register
- Display driver
- Parallel-to-Serial Data Conversion
- Counter
- Hammer Device Information
- Relay