SN74AC533N
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 25.4mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
SN74AC533N Overview
In the 20-DIP (0.300, 7.62mm) package, it is embedded. Packaged in the way of Tube. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74AC series. It is designed with 8 bits. In this device, there are 20 terminations. As a member of the 74AC533 family, it falls under that category. With a supply voltage of 3.3V, it operates. It is equipped with 20 pin count. This electronic device is categorized as a AC electronic device. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Through Hole. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. It reaches a maximum supply voltage (Vsup) of 6V. 3.3/5V power supplies are needed to operate it. There should be a voltage supply (Vsup) greater than 2V. It contains 8 input lines where electronic circuits are present. It features maximum flexibility in design due to 24mA output current.
SN74AC533N Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC533N Applications
There are a lot of Texas Instruments SN74AC533N Latches applications.
- Multi-line decoders
- Automotive ADAS
- Shift right with parallel loading
- Timers
- Counter timers
- Four-bit storage with output enable
- Shift left register
- Stacked or Push-Down Registers
- Synchronous frequency dividers
- Accumulator Registers