SN74AC373PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC373PWRG4 Overview
In the package TSSOP, it can be found. A package of Tape and Reel has been used. The design of this electronic part contains 8 bits. A device such as this has 20 terminations designed. A 3.3V voltage supply is required for operation. With 20 pins, it is equipped. There is a device in this electronic family called AC. The 20 pins are designed into it. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. 3.3/5V power supplies are needed to operate it. 8 circuits enable it to achieve high performance. The low level output current is set to 24mA. In the high level output current, the value is set to -24mA. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used for operation. There is a maximum supply voltage of 6V supported by this device. The minimal supply voltage is 2V. A logic IC that is used in this application is BUS DRIVER. The output current of this device is 24mA, which makes it a very flexible design element.
SN74AC373PWRG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC373PWRG4 Applications
There are a lot of Texas Instruments SN74AC373PWRG4 Latches applications.
- Pseudo-random code generators
- Registers
- TV Set-top Boxes
- Up/down difference counting
- Storage
- Counters
- Audio and video switching
- A/D and D/A conversion
- Hammer Device Information
- Automotive Cluster