SN74AC373DWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC373DWRE4 Overview
In the package SOIC, it can be found. Packaged in the way of Tape and Reel. It is designed with 8 bits. This device is designed with 20 terminations. It operates with a supply voltage of 3.3V. 20 pins are included. AC is the family of this electronic device. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. It operates from 3.3/5V power supplies. The reliability of this device makes it well suited to TR. The superior flexibility of the system is achieved through its use of 8 circuits. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA. There is 24mA output current at the low level. -24mA represents the high level output current. Lower than 85°C is the ideal operating temperature. There should be a temperature above -40°C at which the device operates. The maximum supply voltage is 6V. There is a minimum supply voltage of 2V for it. There is a logic IC BUS DRIVER used in the system. The output current of this device is 24mA, which makes it a very flexible design element.
SN74AC373DWRE4 Features
SOIC package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC373DWRE4 Applications
There are a lot of Texas Instruments SN74AC373DWRE4 Latches applications.
- Hammer Device Information
- Counter control
- Shift right with parallel loading
- Digital bus buffer
- Control circuits
- A/D converters
- Multi-line decoders
- Relay replacement
- Stacked or Push-Down Registers
- Instrumentation