SN74ABT823DWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 4.3 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT823DWR Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. A package named Cut Tape (CT)includes it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74ABT series. You should not exceed 200MHzin its output frequency. The element count is 1 . There is a consumption of 250μAof quiescent energy. The number of terminations is 24. The object belongs to the 74ABT823 family. Power is provided by a 5V supply. A JK flip flop with a 4pFfarad input capacitance is used here. A device of this type belongs to the family of ABT. A part of the electronic system is mounted in the way of Surface Mount. The 24pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in Bus Driver/Transceiver. The flip flop is designed with 9bits. Considering its reliability, this T flip flop is well suited for TR. In order for the device to operate, it requires 5V power supplies. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 5V. It offers maximum design flexibility with its output current of 64mA. It is designed with 3 output lines. As of now, there are 9input lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74ABT823DWR Features
Cut Tape (CT) package
74ABT series
24 pins
9 Bits
5V power supplies
SN74ABT823DWR Applications
There are a lot of Texas Instruments SN74ABT823DWR Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Data Synchronizers
- Consumer
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Communications
- Balanced 24 mA output drivers
- Instrumentation
- Data transfer
- Common Clocks