SN74ABT7819A-20PN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Base Part Number | 74ABT7819 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 18K 512 x 18 x 2 |
| Element Configuration | Dual |
| Nominal Supply Current | 95mA |
| Max Supply Current | 95mA |
| Access Time | 12ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Memory Width | 18 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Bus Directional | Bi-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT7819A-20PN Overview
You can find FIFO memory chip in package 80-LQFP .It's packaged in the shape of a Tray .There is a memory of 18K 512 x 18 x 2 available for storing data and applications.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .The mounting type of the FIFO memory is Surface Mount .For operation, a voltage of 4.5V~5.5V is used.This memory logic is part of the 74ABT series.Mounting it Surface Mount is recommended.I believe it belongs to the 74ABT7819 family of numbers.When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 80 terminations.There are 80 pins for operation.In order for FIFO design to operate, a maximum current of 95mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.It is contained within FIFOs .Despite a frequency of 50MHz , it is capable of maintaining good accuracy.It is normal for a component to be equipped with 5V power supplies.Through the use of 2 circuits, FIFO memory chip is able to achieve enhanced flexibility.
SN74ABT7819A-20PN Features
18K 512 x 18 x 2 memory size
74ABT series
Best part number of 74ABT7819
FIFOs category
SN74ABT7819A-20PN Applications
There are a lot of Texas Instruments SN74ABT7819A-20PN FIFOs Memory applications.
- Event Recorder
- Digital buffering
- Thermal Management for DDR3 Memory Modules
- Computer Systems
- One assembly
- General Data Collection Applications at Extreme High-Temperatures
- Multi-stage synchronizer
- Fabrication Site
- Cardiac Monitoring Device
- Networking