SN74ABT374APW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 4.2 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT374APW Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74ABT series. In order for it to function properly, its output frequency should not exceed 200MHz. In total, it contains 1 elements. T flip flop consumes 250μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74ABT374. Power is supplied from a voltage of 5V volts. A JK flip flop with a 3.5pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ABTfamily. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 8bits are used in this part. In order to achieve its superior flexibility, 8 circuits are used. The D latch operates on 5V volts. The flip flop contains 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Featuring the maximum design flexibility, it has an output current of 64mA . There are no output lines on the JK flip flop.
SN74ABT374APW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT374APW Applications
There are a lot of Texas Instruments SN74ABT374APW Flip Flops applications.
- Automotive
- Instrumentation
- Guaranteed simultaneous switching noise level
- Supports Live Insertion
- Divide a clock signal by 2 or 4
- Test & Measurement
- ATE
- Storage registers
- EMI reduction circuitry
- Computing