SN74ABT16374ADGGR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 72mA |
| Turn On Delay Time | 4.3 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2mA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT16374ADGGR Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. A package named Cut Tape (CT)includes it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ABT series. A frequency of 150MHzshould be the maximum output frequency. The list contains 2 elements. There is 2mA quiescent consumption. The number of terminations is 48. If you search by 74ABT16374, you will find similar parts. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 3.5pF farads. It is a member of the ABTfamily of D flip flop. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. It is designed with a number of bits of 16. A reliable performance of this D flip flop makes it well suited for use in TR. It runs on 5Vvolts of power. This D flip flop is equipped with 0 ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 64mA, this device offers maximum design flexibility. The JK flip flop is with 1 output lines to operate. Currently, there are 3 input lines present. Quiescent current is consumed by the D latch in the amount of 72mA.
SN74ABT16374ADGGR Features
Cut Tape (CT) package
74ABT series
48 pins
16 Bits
5V power supplies
SN74ABT16374ADGGR Applications
There are a lot of Texas Instruments SN74ABT16374ADGGR Flip Flops applications.
- Latch
- Reduced system switching noise
- Event Detectors
- Asynchronous counter
- Balanced 24 mA output drivers
- Circuit Design
- Control circuits
- Safety Clamp
- Consumer
- Computers