SN74166N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CLOCK INHIBIT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 8 |
| Family | TTL/H/L |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 30 ns |
| Power Supply Current-Max (ICC) | 127mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74166N Overview
PDIP is a package containing the embedded device. It sums up to 16 where the chip's terminations add up. Voltage rating of the part is 5V. 16 pins are provided on the device. It is recommended that the mount should be done by Through Hole. In the TTL/H/L series, the electronic component belongs. This chip's operating supply voltage is reported as 5V. Additional aspects of this section are as follows: CLOCK INHIBIT. There is a possibility of delivering voltage at 5V. A total of 8 bits are present on an IC chip. The pin count is 16. Under 70°C, it is recommended that it be used. Operation of this device requires a value greater than 0°C. A voltage of this type is employed under 5.25V. Voltages higher than 4.75V are used for this supply.
SN74166N Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74166N Applications
There are a lot of Texas Instruments SN74166N Shift Registers applications.
- Serial-to-parallel data conversion
- Dual-rank shift, hold, and bus applications
- temporary data storage
- Remote control holding register
- Serial-to-parallel data conversion
- 7-segment display control
- Interconnectors
- Remote control holding register
- Data Format Converters
- Pattern Recognizers