SN65MLVD080DGG
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 1.8394W |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65MLVD080 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 180mA |
| Power Dissipation | 1.8394W |
| Output Current | 8mA |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Data Rate | 250Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 8/8 |
| Driver Number of Bits | 8 |
| Max Input Current | 10μA |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Input Current | 180mA |
| Transmit Delay-Max | 2.4 ns |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 8 |
| Height | 1.2mm |
| Length | 17mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 262.601633mg |
SN65MLVD080DGG Overview
An excellent driver IC for common LEDs thanks to its enhanced 64-TFSOP (0.240, 6.10mm Width) package.The package of this receiver is Tube.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 3V~3.6V.During operation, this electronic part may have up to 8/8 eligible receivers/drivers.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.This line driver ic can operate efficiently with a supply voltage range of 3.3V.There are 64 terminations in this wide receiver so that signals can be driven from the data and received.Transceiver comes with 64 standard pinouts that meet the market's requirements.As the base part number 65MLVD080 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.The driver IC has improved power dissipation control.There is a capability of 8-bit resolution with this ic receiver.There are two types of input voltage supply available for this IC, 3.3V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.In total, there are 1 transceivers implemented by this module isolated transceiver.The module isolated transceiver contains 8 receivers.In this bluetooth transceiver, we are able to get a maximum output current of 8mA.
SN65MLVD080DGG Features
Tube package
64 pin count
64 pins
SN65MLVD080DGG Applications
There are a lot of Texas Instruments SN65MLVD080DGG Drivers/Receivers/Transceivers applications.
- Thermal management
- Routers
- Changeing the frequency from IF to RF
- Notebook
- Single to Multimode Fiber Conversion
- Low power, low voltage systems
- Remote controls
- Point-to-point networking
- Wireless transmission
- Sensor reporting