SN65LVDS22PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS22 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 2:2 |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Power Dissipation | 839mW |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | Translator |
| Differential Output | YES |
| Input | LVDS |
| Max Frequency | 200MHz |
| Driver Number of Bits | 2 |
| Interface Standard | EIA-644; TIA-644 |
| Number of Transceivers | 1 |
| Data Rate (Max) | 250Mbps |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 2 |
| Delay Time | 4.0ns |
| Capacitance - Input | 3pF |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS22PW Overview
For ease of transportation, the power buffer is packaged in 16-TSSOP (0.173, 4.40mm Width).As of right now, this power buffer can be shipped in Tube packages.The Surface Mount universal mout is designed for easy adaptability.As far as types go, this is a typical Buffer, Multiplexer.It works on 3V~3.6V voltage.It is the cooperation of the 1 x 2:2 channels that maintains the quality of the output.Hence, it facilitates the entry of LVDS into the system.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.With "65LVDS22," you will find more pin-to-pin solutions.It has 16 terminals.During reflow, 260 is the peak temperature.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 16 pins that it has.There are 16 pins on the op amp buffers.It has a Surface Mount for mouting on PCB or other boards.Voltage 20mA is needed to operate this power buffer.During normal operation, 3.3V operating voltage is required.Normally, 20mA is the supply current for this splitter.Receiver 2 is implemented in this repeater signal.
SN65LVDS22PW Features
1 x 2:2 channels.
SN65LVDS22PW Applications
There are a lot of Texas Instruments SN65LVDS22PW Signal Buffers, Repeaters, Splitters applications.
- Clock Distribution
- Medical
- Clock Distribution
- Test Equipment
- Network Switches/Routers
- Laptop Computers (for External Video Cards)
- Desktop Computers
- Loopback
- Communications Switchers
- Portable IPC/HMI