SN65LVDS179D
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS179 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 12mA |
| Power Dissipation | 1.11W |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 2.7 ns |
| Max Output Voltage | 454mV |
| Logic Function | Receiver, Transceiver |
| Data Rate | 150Mbps |
| Differential Output | YES |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Max Input Current | 20μA |
| Duplex | Full |
| Interface Standard | EIA-644; TIA-644 |
| Receive Delay-Max | 4.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.00002A |
| Number of Receivers | 1 |
| Out Swing-Min | 0.247 V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 69.994973mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 1.11W |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
SN65LVDS179D Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver consumes 3V~3.6V for its power supplyAs many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.ICs that are packaged with market standard pinouts are available on the market.Since the part number 65LVDS179 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 8 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.This ic receiver provided a 1-bit resolution capability. An input voltage supply of 3.3V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.A 1 receiver is included.It has the ability to drive LEDs with an input voltage of up to about 12mA with the help of this integrating circuit.The 65LVDS series is a power-saving integrating circuit that represents an enhanced energy-saving approach.
SN65LVDS179D Features
Tube package
8 pin count
8 pins
65LVDS series
SN65LVDS179D Applications
There are a lot of Texas Instruments SN65LVDS179D Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- Changeing the frequency from IF to RF
- Wireless network systems
- Laser diode bonding
- Sensor reporting
- Remote controls
- VoIP phones
- Thermal management
- Telecom applications
- Vehicle