SN65LBC174DW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Driver |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 65LBC174 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Data Rate | 30Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Receiver Hysteresis | 40mV |
| Number of Drivers | 4 |
| ESD Protection | No |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.00006A |
| Out Swing-Min | 1.1 V |
| High Level Input Current-Max | 0.0001A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LBC174DW Overview
This driver chip is excellent for driving common LEDs due to its enhanced 20-SOIC (0.295, 7.50mm Width) package.The Tube package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Driver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver requires a 4.75V~5.25V power supply.As many as 4/0 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 5V.This integrated circuit has 20 terminations designed for driving and receiving signals from data.A package consisting of 20 market standard pinouts is provided with this integrated circuit.Since the part number 65LBC174 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It is a 20-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.An input voltage supply of 5V is required to operate the transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.On the part, 4 drivers are embedded in order to facilitate the operation of the device.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 7mA.In the case of input current exceeding 7mA, this can transceiver may malfunction.
SN65LBC174DW Features
Tube package
20 pin count
20 pins
5V power supply
SN65LBC174DW Applications
There are a lot of Texas Instruments SN65LBC174DW Drivers/Receivers/Transceivers applications.
- Wireless teaching
- Switches
- Wireless HD Photography
- SONET/SDH Network
- Wireless communication
- Wireless projection application for business talks
- Vehicle
- Datacom networking applications
- VoIP phones
- Desktop PC