SN65HVD3085EDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 583mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65HVD3085 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 256 |
| Nominal Supply Current | 900μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 150 ns |
| Data Rate | 1Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 500 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD3085EDGKR Overview
LED drivers benefit from this IC's enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.The base part number 65HVD3085 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 8 pins.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.Typically, the resolution of this receiver is specified to be 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.In total, there are 1 transceivers implemented by this module isolated transceiver.I would like to highlight the fact that this transceiver module contains a total of 256 circuits.
SN65HVD3085EDGKR Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
SN65HVD3085EDGKR Applications
There are a lot of Texas Instruments SN65HVD3085EDGKR Drivers/Receivers/Transceivers applications.
- Televisions
- LAN, SAN, WAN (local, storage, work area networks)
- Wireless transmission
- Tuner
- Sensor reporting
- Laser diode bonding
- WDM transmission
- Ship
- interconnection between switches
- Point-to-point networking