SN65HVD20P
| Parameters | |
|---|---|
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65HVD20 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Data Rate | 25Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 130mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
SN65HVD20P Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-DIP (0.300, 7.62mm) package.In this package, the receiver is mounted in the Tube format.The Transceiver can transceiver type enables this part to be used in a wide range of applications.On any Through Hole-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 4.5V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.There are 8 pinouts available on this transceiver which are market standard.65HVD20 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 8-pin driver IC.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.It is important to note that this ic receiver had a maximum resolution of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.This IC implements 1 transceivers overall.With an input voltage of 9mA, this integrating circuit has the ability to drive LEDs with an output voltage of 9mA.
SN65HVD20P Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD20P Applications
There are a lot of Texas Instruments SN65HVD20P Drivers/Receivers/Transceivers applications.
- Wireless network systems
- Remote controls
- Telecom applications
- Data center
- Cordless telephone
- Metro access rings
- Tuner
- IPTV front end
- Switching system
- SONET/SDH Network