SN65HVD06D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 65HVD06 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Max Supply Current | 15mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65HVD06D Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A power supply of 4.5V~5.5V is used by this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.With a voltage range of 5V, this driver IC can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.You can search with 65HVD06 to get more variants of this part, since it identifies the product type, temperature, package, etc.8-pin driver chip with enhanced power dissipation.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.An important feature of this ic receiver was its 1-bit resolution capability.Typically, the resolution of this receiver is specified to be 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.The driver IC in this product is designed so that it can be powered by 5V.In total, there are 1 transceivers implemented by this module isolated transceiver.This integrating circuit is able to drive LEDs with an input voltage of 15mA.When the input current reaches or exceeds 15mA, this can transceiver could have mal-functions.
SN65HVD06D Features
Tube package
8 pin count
8 pins
5V power supply
SN65HVD06D Applications
There are a lot of Texas Instruments SN65HVD06D Drivers/Receivers/Transceivers applications.
- Copper connection network
- VoIP phones
- Remote controls
- Optical sub-assembly (OSA)
- Aircraft positioning
- Remote controls
- Fiber-to-the-desktop
- Wireless network systems
- Vehicle
- Laser diode bonding