SN54S194J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 18.5 ns |
| Turn On Delay Time | 18.5 ns |
| Family | S |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.02 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 70 MHz |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN54S194J Overview
The device is embedded in CDIP package. 16 is the total number of terminations on the chip. A Rail/Tube case is used to pack it. A voltage of 5V is specified for the part's operating supply. A total of 1 elements are present on this part. 16 pins are present on the device. The recommended mounting method is Through Hole. In the S series, the electronic component belongs. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: HOLD MODE. Devices with voltage delivery capabilities of 5V are available. There are 4 bits on the IC chip. In total, it has 16 pins. Under temperatures below 125°C, it is recommended to use it. This device should not be operated with a value lower than -55°C. Under 5.5V, this voltage is employed. It is necessary to use a voltage that is higher than 4.5V to provide this supply.
SN54S194J Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN54S194J Applications
There are a lot of Texas Instruments SN54S194J Shift Registers applications.
- Remote control holding register
- temporary data storage
- Interconnectors
- Serial to parallel converter
- Pattern Recognizers
- store data in digital form
- Sequence generator
- Pseudo Random Pattern Generator
- ROM Chips
- Data Format Converters