SIP5670CG-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 21 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | QSOP |
| Surface Mount | YES |
| Supplier Device Package | 36-QSOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | SCSI |
| Resistance | 105Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Bus Terminators |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP56* |
| Pin Count | 36 |
| JESD-30 Code | R-PDSO-G36 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 3/5V |
| Operating Supply Current | 30mA |
| Differential Output | YES |
| Number of Signal Lines | 9 |
| Height | 2.34mm |
| Length | 15.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SIP5670CG-T1-E3 Overview
A transmission line may also have 9 terminations, which are made using devices matched to its characteristic impedance. Because of its low package cost, the QSOP is widely used in the electronic industry. Material choices are based on Tape & Reel (TR)'s. The PCB is mounted using Surface Mount. A temperature greater than 0°C~70°C should not be used as the operating temperature. It is a SCSI-qualified material for standard applications. A 2.7V~5.25V Supply Voltage is provided to ensure normal operation. Base Part Number SIP56* is useful for finding related parts. A specific purpose is served by the 36 pins. These lines are devoted exclusively to the transmission of signals or intelligence and are either public or private. High efficiency can be achieved by maintaining the supply voltage at 3.3V. It belongs to the Subcategory Bus Terminators. Operating 3/5V Power Supplies is required. Its resistance is 105Ohm (Ω). Device packages 36-QSOP are used by the supplier. As the device can operate at supply voltages of 30mA, it is suitable for a wide range of applications. To fully perform 5.25V's functions, it must receive its supply current.
SIP5670CG-T1-E3 Features
9 terminations
Tape & Reel (TR) package
SIP56* family
36 pin count
9 signal lines
3/5V power supplies
SIP5670CG-T1-E3 Applications
There are a lot of Vishay Siliconix SIP5670CG-T1-E3 Signal Terminators applications.
- Programmable logic controller
- USB hubs
- Storage area networks (SAN)
- SCSI cable
- Data Networking
- mainframes
- Data Routers
- Desktop PCs
- Compact disk drives
- laser printers