SIP4282DNP3-T1GE4
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 480mOhm |
| Terminal Finish | Palladium/Gold (Pd/Au) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 324mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | UVLO |
| Rds On (Typ) | 105m Ω |
| Output Current Flow Direction | SOURCE |
| RoHS Status | ROHS3 Compliant |
SIP4282DNP3-T1GE4 Overview
It is packaged in the manner of a Tape & Reel (TR).This file is included in package 4-UFDFN Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts has been specified.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.A total of 4 terminations have been found in it.In order to operate, 4 pins are used.To meet the operation criteria, the maximum output current drops to 1.4A.Surface Mount is mounted in the way of this LED driving board.In total, it has 4 pins.In this case, there is 480mOhm resistance in the LED driving board.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The power supply of the part is 2/5V.
SIP4282DNP3-T1GE4 Features
Resistance of 480mOhm
SIP4282DNP3-T1GE4 Applications
There are a lot of Vishay Siliconix SIP4282DNP3-T1GE4 Power Switches ICs applications.
- Hot-Swap Systems
- HDD, SSD
- Storage Drives
- Mobile Communication Devices
- Set-Top Boxes
- Notebook and Tablet Computers
- Portable Devices
- Hot Swap
- Various applications equipped with buttons
- Low Voltage I/O System Power