SIP4280ADT-1-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 440mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | SIP4280 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 440mW |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | UVLO |
| Turn On Time | 40 μs |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP4280ADT-1-T1-E3 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package SOT-23-6 Thin, TSOT-23-6.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.Slew Rate Controlled features are available on the lighting driver.It belongs to the family SIP4280.It contains 8 terminations.The 6 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.A supply voltage of 5V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 6 pins.Currently, the LED driving board has 80mOhm resistance.This case has the output current set to 2.3A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).The power supply of the part is 2/5V.
SIP4280ADT-1-T1-E3 Features
Supplied from 5V
Resistance of 80mOhm
SIP4280ADT-1-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4280ADT-1-T1-E3 Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless Headsets
- Hard Disk Drives
- Portable/Handheld Devices
- USB Power Distribution
- Wireless Modem Data Cards
- Wireless/Networking Cards
- USB3.1 Power Delivery
- PDAs
- USB Ports/Hubs