SIP41103DM-T1-E3
| Parameters | |
|---|---|
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP41103 |
| Pin Count | 10 |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Operating Supply Current | 3mA |
| Power Dissipation | 960mW |
| Max Supply Current | 3mA |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Rise Time | 55ns |
| Fall Time (Typ) | 45 ns |
| Rise / Fall Time (Typ) | 32ns 36ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.03 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Supply Voltage1-Nom | 5V |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 900mA 1.1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 4V |
| Turn Off Time | 0.03 μs |
| High Side Voltage - Max (Bootstrap) | 50V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® MLP33-10 |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 960mW |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
SIP41103DM-T1-E3 Overview
For greater flexibility, the PowerPAK? MLP33-10 package is adopted.A packaging method of Tape & Reel (TR) is used.2 drivers are incorporated for its configuration.The device is mounted in the direction of Surface Mount.By using 4.5V~5.5V supply voltage, it is able to demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.-40°C~125°C TJ is the allowed temperature range for this device.Non-Inverting is used as the input type in this program.Mosfet driver is based on 10 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number SIP41103.Mounting the device requires Surface Mount.There are 10 pins available in the device.The device is specifically designed to operate at 5V volts.Mosfet driver is possible for the output current to be as low as 1.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.Components with 10 pins are available.Ideally, the high-side voltage should not exceed 50V.Having the maximum power dissipation of 960mW indicates its maximum capacity to conduct power losses without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 3mA.Based on its power supplies of 5V, it solves the problem of power supply failure for a variety of applications.During operation, a voltage of 3mA is applied to the power supply.By using the frequency 1MHz, we can increase efficiency.
SIP41103DM-T1-E3 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 50V
Maximum power dissipation of 960mW
SIP41103DM-T1-E3 Applications
There are a lot of Vishay Siliconix SIP41103DM-T1-E3 gate drivers applications.
- AC-DC Inverters
- Multicolor LED/laser displays
- Industrial Modules
- Industrial motor drives - compact, standard, premium, servo drives
- Solar inverters
- UPS systems
- Broadcast equipment
- Solar power supplies
- Uninterruptible Power Supplies (UPS)
- RGB applications