SIP2800DY-T1-E3
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Input Voltage (Min) | 6V |
| Topology | Buck, Boost, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 52kHz |
| Max Duty Cycle | 99 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP280* |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 8.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 10V |
SIP2800DY-T1-E3 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 6.9V~12V volts and has 6.9V~12V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. A switching controller such as this can switch at a value of 46kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. Other relevant dc to dc converter ics will be returned if you search "SIP280*". Switching converter has a total of 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 6V as the minimum input voltage of dc dc voltage regulator. A 8.1V voltage of DC regulator was detected in the test statistics. You should note that the dc dc regulator's usual output current is 200mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 99 % during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator52kHz has the maximum frequency. Users should apply 10V to operate the voltage regulator dc to dc safely and reliably. The supply current of the voltage controller is 1mA.
SIP2800DY-T1-E3 Features
Transistor Driver Outputs
Switching Frequency: 46kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
SIP2800DY-T1-E3 Applications
There are a lot of Vishay Siliconix SIP2800DY-T1-E3 DC to DC converter applications.
- Wind power
- Wide-range voltage regulation circuits
- Grinders
- Milling machines
- Computed tomography (CT)
- CNC system
- Electrical distribution systems
- Domestic water pumps
- Digital precision reference circuits
- Boring machines