SIM6813M
| Parameters | |
|---|---|
| Factory Lead Time | 36 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.657, 16.70mm), 29 Leads |
| Number of Pins | 40 |
| Operating Temperature | -20°C~100°C TA |
| Packaging | Tube |
| Published | 2002 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Applications | AC Motors |
| Technology | Power MOSFET |
| Voltage - Supply | 13.5V~16.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.778mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Max Output Current | 4.5A |
| Supply Voltage-Max (Vsup) | 16.5V |
| Supply Voltage-Min (Vsup) | 13.5V |
| Interface | Logic |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Output Current per Channel | 3A |
| Collector Emitter Voltage (VCEO) | 500V |
| Max Collector Current | 3A |
| Voltage - Load | 400V Max |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 1.4 Ω |
| Switching Frequency | 20kHz |
| Motor Type | Brushless DC (BLDC) |
| Current - Peak Output | 4.5A |
| Load Type | Inductive |
| Height | 4mm |
| Length | 36mm |
| Width | 14.8mm |
| RoHS Status | RoHS Compliant |
SIM6813M Overview
In order to package H bridge, Tube is used.A cost-saving measure is taken to include H bridge in the 40-DIP (0.657, 16.70mm), 29 Leads package.The supply voltage of 13.5V~16.5V can improve reliabilbridge drivery.H bridge circuit is put into place in the way of Through Hole.As long as -20°C~100°C TA operates at the right temperature, motor driver H bridge will operate normally.There are lots of uses for H bridge motor driver, including AC Motors.The PCB is mounted wH gateh Through Hole.In addH gateion to Bootstrap Circuit, H gate has the following specific characteristics.A transmission line can be terminated at a 40 termination with the H bridge whose characteristic impedance matches the transmission line.40 pins is used as pronged contacts as H bridge ic of a signal interface.A voltage of 15V is used as the supply voltage.As its analog IC type, H bridge circuit has been incorporated with AC MOTOR CONTROLLER.An ambient temperature of 4.5A enables a power supply to provide a maximum load current.This is the maximum amount of current that can reach 4.5A.
SIM6813M Features
Available in 40-DIP (0.657, 16.70mm), 29 Leads Package / Case
Operating Temperature at the range of Through Hole
Subcategory: 4.5A
SIM6813M Applications
There are a lot of Sanken SIM6813M Full Bridge Drivers, Half-Bridge Drivers applications.
- Compact Blade Servers
- VTR
- OA equipments
- Voltage Regulators for CPUs
- PC peripherals
- DVD players
- Non-V-Core
- Quad DC motor
- High-Performance Gaming Motherboards
- Voltage Regulators for GPUs