SI9913DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 830mW |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9913 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Operating Supply Current | 9mA |
| Power Dissipation | 830mW |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 30ns 20ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.03 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Turn Off Time | 0.03 μs |
| High Side Voltage - Max (Bootstrap) | 30V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SI9913DY-T1-E3 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Gate drivers is configured wGate driversh 2 drivers.Surface Mount is the way in which it is mounted.WGate driversh a 4.5V~5.5V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number SI9913.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.This device operates with 5V supply voltage.In the maximum case, the output current can be limited to 1A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board contains 8 pins for component connections.High-side voltage - Max (Bootstrap) can be as low as 30V.Its maximum power dissipation of 830mW also demonstrates its maximum ability to transfer power without overheating.With its power supplies of 5V, it solves the problems of power supply for a variety of applications.With a 9mA supply voltage, it operates.The frequency of 1MHz can be adjusted in order to improve efficiency.
SI9913DY-T1-E3 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 30V
Maximum power dissipation of 830mW
SI9913DY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9913DY-T1-E3 gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Power factor correction (PFC) circuits
- Uninterruptible Power Supplies (UPS)
- PCMCIA applications
- Topologies
- Industrial Motor Inverter - Power Tools, Robotics
- A/D drivers
- High current laser/LED systems
- Motor Control
- DC-DC Converters