SI9910DY-E3

SI9910DY-E3

Surface Mount Bulk Obsolete Gate Drivers ICs Non-Inverting 1 500V V 8-SOIC (0.154, 3.90mm Width) SI9910 High-Side


  • Manufacturer: Vishay Siliconix
  • Origchip NO: 880-SI9910DY-E3
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 872
  • Description: Surface Mount Bulk Obsolete Gate Drivers ICs Non-Inverting 1 500V V 8-SOIC (0.154, 3.90mm Width) SI9910 High-Side (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature -40°C~150°C TJ
Packaging Bulk
Published 2014
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Max Power Dissipation 700mW
Voltage - Supply 10.8V~16.5V
Base Part Number SI9910
Number of Outputs 1
Max Output Current 1A
Max Supply Voltage 16.5V
Min Supply Voltage 10.8V
Operating Supply Current 500μA
Power Dissipation 700mW
Max Supply Current 500μA
Propagation Delay 135 ns
Input Type Non-Inverting
Turn On Delay Time 135 ns
Rise Time 50ns
Fall Time (Typ) 35 ns
Rise / Fall Time (Typ) 50ns 35ns
Channel Type Single
Number of Drivers 1
Driven Configuration High-Side
Gate Type N-Channel MOSFET
Current - Peak Output (Source, Sink) 1A 1A
High Side Voltage - Max (Bootstrap) 500V
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SI9910DY-E3 Overview


Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Bulk.The configuration is supported by 1 drivers.Gate drivers is mounted in the way of Surface Mount.In the absence of a 10.8V~16.5V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.There are numerous related parts listed under its base part number SI9910.The device is mounted with Surface Mount.At the time of design, it is configured with 8 pins.As a maximum, there is 1A limit to the output current.There can be a voltage up to 500V on the high-side (Bootstrap).Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.There is a maximum operating temperature of 85°C.Temperatures below -40°C are allowed as the minimum.Its maximum power dissipation of 700mW also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 500μA.In order for the device to operate, the supply voltage must be 16.5V.For operation, 10.8V is the minimum supply voltage.The power supply voltage for this device is set to 500μA.

SI9910DY-E3 Features


Embedded in the Bulk package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 700mW

SI9910DY-E3 Applications


There are a lot of Vishay Siliconix SI9910DY-E3 gate drivers applications.

  • Uninterruptible Power Supplies (UPS)
  • Broadcast equipment
  • Motor Control
  • Isolated Supplies for Motor Control
  • Dual-Battery Systems
  • Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
  • High power buffers
  • Power factor correction (PFC) circuits
  • AC-DC Inverters
  • UPS systems

Write a review

Note: HTML is not translated!
    Bad           Good