SI5310-C-GM
| Parameters | |
|---|---|
| Input | Clock |
| Ratio - Input:Output | 2:2 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Duty Cycle | 50 % |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 40.256323mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| Series | DSPLL® |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Clock Multiplier |
| Applications | SONET;SDH |
| Voltage - Supply | 2.375V~2.625V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | SI5310 |
| Output | CML |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 121mA |
| Frequency (Max) | 668MHz |
SI5310-C-GM Overview
In order to package it as a clock IC, the Tube package is used. In the 20-VFQFN Exposed Pad package, there is an embedded clock generator. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. Providing a maximum frequency of 668MHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generators should operate with the voltage supply of 2.375V~2.625V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. CML is designed for clock generator's output. An electrical part such as this one can be classified as a Clock Multiplier component. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. SI5310 is the base part number for finding related electronic parts. There are a number of 20 pins that are available on the clock generators. This clock generator is a member of DSPLL? series. Clock PLL is configured with 2 output. A supply current of 121mA is required to fully operate clock PLL. It is possible to apply the frequency synthesizers in the SONET;SDH axis.
SI5310-C-GM Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 2.5V
SI5310-C-GM Applications
There are a lot of Silicon Labs SI5310-C-GM Clock Generators applications.
- Televisions
- Computers to manage memory cards
- FMCW Radar
- Integrated phase noise in aerospace systems
- MRI
- VSAT (Small Ground Satellite Station)
- Bluetooth receivers
- Peripheral devices
- Automatic control system test
- FPGA and processor clocks