SI52112-B6-GM2
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Strip |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SI52112 |
| Output | HCSL |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 17mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Max Duty Cycle | 55 % |
| Main Purpose | PCI Express (PCIe) |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
SI52112-B6-GM2 Overview
The Strip package contains it. There is a 10-WFDFN Exposed Pad-serial number on the packaging of this product that identifies it as being packaged in a case. The recommended mounting type is Surface Mount. Clock program has 10 terminations. There is 3.3V voltage provided by the part. For NOT SPECIFIED, the peak reflow temperature of this part is used. This device contains CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, or peripheral ICs. In the device, there are 1. There is a wide range of operating temperatures for -40°C~85°C. Depending on the component, a voltage of 2.97V~3.63V can be supplied. This component primarily serves the purpose of PCI Express (PCIe). As the output, HCSL should be used. 2009 Parts of the part have not been published. In order to find information about a part, you need to start at SI52112. Clock program is recommended that Clock program be mounted wClock programh Surface Mount. On this device, there are 10 pins. The supply voltage should be kept at 3.3V. Supply current is available at 17mA. Using a frequency of 100MHz will allow it to reach excellent efficiency.
SI52112-B6-GM2 Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): NOT SPECIFIED
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
run the output at th range of HCSL
with 10 Pins
operate supply voltage at the range of 3.3V
SI52112-B6-GM2 Applications
There are a lot of Silicon Labs SI52112-B6-GM2 application specific timer?applications.
- Communications
- OTN Muxponders and Transponders
- DU (Distribution Unit)
- Storage area networks
- Printers, scanners, projectors
- eCPRI RRH (Remote Radio Head)
- Routers
- Print Imaging
- Broadcast video/audio timing
- Audio/video equipment, gaming