SI4720CY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 15.5mOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 2.5W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI4720 |
| Function | Power Management |
| Number of Outputs | 2 |
| Operating Supply Voltage | 12V |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 6V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1.1μA |
| Power Dissipation | 2.5W |
| Output Current | 0A |
| Adjustable Threshold | NO |
| Turn On Delay Time | 10 μs |
| Supply Current-Max (Isup) | 0.006mA |
| Drain to Source Voltage (Vdss) | 30V |
| Turn-Off Delay Time | 2.1 μs |
| Battery Chemistry | Multi-Chemistry |
| Drain to Source Resistance | 20mOhm |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI4720CY-T1-E3 Overview
It is appropriate for the 16-SOIC (0.154, 3.90mm Width) package. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. As of right 1w, there are 1 channels available. It has a total of 16 pins. It comes in a case with a Tape & Reel (TR). To mount this electronic component, use Surface Mount. In order for this electric part to operate properly, its supply voltage must not be lower than 6V volts. This electronic component is mounted in the way of Surface Mount. It is recommended that the power management IC's supply voltage is 30V higher than 30V volts. As far as the Power Management functions are concerned, it can be delivered. Optimal performance of the electric part depends on operating temperature at -25°C~85°C TA. A battery chemistry of Multi-Chemistry is used in this electronic part. Always keep this transceiver ic set to 10V. There is a SI4720 family at the core of it. Supply current (Isup) must not exceed 0.006mA. The operating supply voltage for this power management IC is specified as 12V. The transceiver ic can be supplied with a maximum of 0A watts of current. This electric component has 2 outputs configured.
SI4720CY-T1-E3 Features
Available in 16-SOIC (0.154, 3.90mm Width) Package
with 16 Pins
Mounting Type: Surface Mount
Battery Chemistry : Multi-Chemistry
operate supply voltage at the range of 10V
With 2 outputs
SI4720CY-T1-E3 Applications
There are a lot of Vishay Siliconix SI4720CY-T1-E3 Battery Management ICs applications.
- Base station RRH
- Industrial Lidar
- Passenger boats
- UAV
- Refrigerator
- Monitoring the battery
- Head up display (HUD)
- Chargers 50 kW to 350 kW
- Electric train traction batteries
- Motor drive - 3 phase AC100V-240V AC servo