SI1869DH-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Current Rating | 1.2A |
| Base Part Number | SI1869 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 2 |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | -20V |
| Continuous Drain Current (ID) | 700mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 1.8V |
| Input Characteristics | STANDARD |
| Voltage - Load | 1.8V~20V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 132m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 165mOhm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI1869DH-T1-E3 Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in 6-TSSOP, SC-88, SOT-363.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -55°C~150°C TJ.The LED driver has a total of 1 outputs.It produces a maximum output voltage of P-Channel volts at its maximum output.It is equipped with Slew Rate Controlled features.There is a SI1869 family of things that it belongs to.There are 6 terminations in it.For operation, 6 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 1.2A in order to meet the operation requirements.Using a voltage of 2.5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.6 pins are equipped with it.A total of 2 channels are available for you to choose from.
SI1869DH-T1-E3 Features
Supplied from 2.5V
2 channels
SI1869DH-T1-E3 Applications
There are a lot of Vishay Siliconix SI1869DH-T1-E3 Power Switches ICs applications.
- Portable Music Players
- Low Voltage I/O System Power
- Hot-Swap Systems
- Hot Swap
- PC Card Hot Swap
- Hard Disk Drives
- Smartphone and PDA
- Hot Swaps
- Set-Top Boxes
- HDD and SSD