SCC68681E1A44,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SCC68681 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | S68000 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SCC68681E1A44,518 Overview
In addition, it is available in the cost-effective package 44-LCC (J-Lead).The transmission is conducted over 2, DUART channels.Packaging is based on Tape & Reel (TR).Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.44 terminations are used as parts of its configuration.This device is powered by a voltage of 5V.At present, this electronic part has a status of Obsolete.Data communication is supported by 2 serial I/Os.You can mount it by using Surface Mount.5V supply voltage is required to operate it.This electronic device belongs to the 44-pin IC family.This IC operates at a clock frequency of 4MHz.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.Operating at 85°C is its maximum temperature limit.This part has a base part number of SCC68681.A minimum of -40°C is required for operation.
SCC68681E1A44,518 Features
2 serial I/Os
Clock frequency of 4MHz
SCC68681E1A44,518 Applications
There are a lot of NXP USA Inc. SCC68681E1A44,518 UARTs applications.
- Ethernet Network Routers
- Battery Operated Instruments
- Point-of-Sale Systems
- Point-of- Sale Terminals
- Wireless Infrared Data Communications Systems
- GPS Systems
- Battery Operated Electronics
- Factory automation and process control
- Handheld Terminal
- Multi serial ports RS-232/RS-422/RS-485 Cards