SCC2691AE1A28,602
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SCC2691A |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| Number of I/O | 1 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Supply Current-Max | 2.5mA |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.0046875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| RoHS Status | ROHS3 Compliant |
SCC2691AE1A28,602 Overview
The 28-LCC (J-Lead) package is the most cost-effective.The transmission is conducted over 1, UART channels.As for packaging, Tube is chosen.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.As part of its configuration, it uses 28 terminations.In order for it to operate, a voltage of 5V must be provided.As of right now, this electronic part is in a Active status.There are 1 serial I/Os available for communication of data.Through Surface Mount, it can be mounted.There is a voltage supply of 0 volts for the device.An IC with 28 pins is what this device is.A frequency of 4MHz is measured for this IC.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.UART is able to operate at the maximum temperature of 85°C.When power supplies are provided of 5V, it is reliable and efficient for electronic designers.A base part number of SCC2691A is used for this product.A minimum temperature of -40°C is required to operate it.Data can be transferred through 1 I/Os.Supply currents above 2.5mA are acceptable.
SCC2691AE1A28,602 Features
1 serial I/Os
Clock frequency of 4MHz
Power supplies of 5V
1 I/Os
SCC2691AE1A28,602 Applications
There are a lot of NXP USA Inc. SCC2691AE1A28,602 UARTs applications.
- Remote Access Servers
- Battery Operated Electronics
- Handheld Computers
- Router C ontrol
- Cellular Data
- Handheld Terminals and Tablets
- GPS Systems
- Factory Automation and Process Controls
- Point-of-Sale Systems
- Industrial computing