SCC2691AE1A28-T
| Parameters | |
|---|---|
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 1 |
| Nominal Supply Current | 2.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Data Rate | 115.2 kbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.0046875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | PLCC |
SCC2691AE1A28-T Overview
There is a cost-effective package PLCC available.Transmission is done through 1 channels.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.A configuration of 28 terminations is used.UART operates on 5V supply voltage.As a means of communicating data, there are 1 serial I/Os available.This electronic device belongs to the 28-pin IC family.IC clock frequency is set to 4MHz.UART is recommended that the operating temperature does not exceed -40°C to ensure long-term, normal performance.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.Maintaining a voltage below 5.5V will ensure reliability.Supply voltages above 4.5V are known to ensure reliability.In order for the device to operate efficiently, 5V is the supply voltage.Data can be transferred through 1 I/Os.
SCC2691AE1A28-T Features
1 serial I/Os
Clock frequency of 4MHz
Operating supply voltage of 5V
1 I/Os
SCC2691AE1A28-T Applications
There are a lot of NXP Semiconductors / Freescale SCC2691AE1A28-T UARTs applications.
- GPS Systems
- White goods
- Domestic Applications
- Infrared Transceivers
- Point-of-Sale Systems
- Battery Operated Instruments
- GPS Devices
- Cellular data devices
- Remote Access Servers
- Router C ontrol