SCC2681TC1A44,529
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | TIN |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SCC2681 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SCC2681TC1A44,529 Overview
In the 44-LCC (J-Lead) package, you can get the product at a low cost.The transmission of data takes place over 2, DUART channels.Tube is adopted for packaging.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 44 terminations is used.In order to operate it, a supply voltage of 5V is required.At present, this electronic part has a status of Obsolete.Data communication is supported by 2 serial I/Os.Mounting is done through Surface Mount.UART operates wUARTh the supply voltage of 5V.This electronic device belongs to the 44-pin IC family.There is a 4MHz clock frequency for this IC.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.The device is capable of operating at a maximum temperature of 70°C.This part has a base part number of SCC2681.
SCC2681TC1A44,529 Features
2 serial I/Os
Clock frequency of 4MHz
SCC2681TC1A44,529 Applications
There are a lot of NXP USA Inc. SCC2681TC1A44,529 UARTs applications.
- Cellular Phones DataPort
- Handheld Terminals and Tablets
- Infrared Transceivers
- Point-of- Sale Terminals
- Battery Operated Electronics
- Cellular Data
- Router C ontrol
- Multi-port RS-232/RS-422/RS-485 Cards
- Factory Automation
- Industrial computing