SC28L92A1BS,551
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2007 |
| Series | Impact |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | SC28L92A |
| Pin Count | 48 |
| JESD-30 Code | S-PQCC-N48 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
SC28L92A1BS,551 Overview
In addition, it is available in the cost-effective package 48-VFQFN Exposed Pad.The transmission of information is carried out through 2, DUART channels.Packaging is based on Tray.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.There are 48 terminations used in its configuration.In order for it to operate, a voltage of 3.3V must be provided.As of right now, this electronic part is in a Obsolete status.As a means of transferring data, there are 2 serial I/Os.Mounting is done through Surface Mount.In order for it to operate, a voltage of 3.3V 5V must be applied.This electronic device is a type of 48-pin IC.Its clock frequency is measured at 8MHz.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter in it.UART can operate at a maximum temperature of 85°C.Moreover, it is also able to perform ALSO OPERATES AT 5V SUPPLY.The base part number of the part is set to SC28L92A.In order to operate, the device must be kept at a minimum temperature of -40°C.The electronic component belongs to the series Impact.
SC28L92A1BS,551 Features
2 serial I/Os
Clock frequency of 8MHz
ALSO OPERATES AT 5V SUPPLY
SC28L92A1BS,551 Applications
There are a lot of NXP USA Inc. SC28L92A1BS,551 UARTs applications.
- Point-of-Sale Systems
- Wireless Infrared Data Communications Systems
- Infrared Transceivers
- Communications equipment
- Portable and battery operated devices
- Factory Automation
- Point-of- Sale Terminals
- Cellular data devices
- Serial to Parallel/Parallel to Serial Converter
- GPS Devices