SC28L92A1A,512
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2004 |
| Series | Impact |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28L92A |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SC28L92A1A,512 Overview
There is a cost-effective 44-LCC (J-Lead) package available for this product.UART is possible to transmUART on 2, DUART channels.As for packaging, Tube is chosen.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.In its configuration, 44 terminations are used.The device operates at 3.3V voltage.This electronic part is Obsolete at present.Data is communicated via 2 serial I/Os.The mount can be accessed via the Surface Mount method.In order for it to operate, a voltage of 3.3V 5V must be applied.This electronic device belongs to the 44-pin IC family.This IC measures its clock frequency at 8MHz.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.UART can operate at a maximum temperature of 85°C.With power supplies of 3.3/5V, electronic designers can use it reliably and efficiently.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 5V SUPPLY.SC28L92A is used as its base part number.It is able to operate at the minimum temperature of -40°C.Impact is the series number of the electronic component.
SC28L92A1A,512 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 5V SUPPLY
SC28L92A1A,512 Applications
There are a lot of NXP USA Inc. SC28L92A1A,512 UARTs applications.
- Personal Digital Assistants Modules
- Battery Operated Electronics
- Portable and battery operated devices
- Battery Operated Instruments
- DTE for Modem Communication Systems
- Personal Digital Assistants
- Factory Automation and Process Controls
- Multi-port RS-232/RS-422/RS-485 Cards
- Ethernet Network Routers
- Handheld Terminal