SC26C92C1A,512
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
SC26C92C1A,512 Overview
UART is available in the cost-effective 44-LCC (J-Lead) package.UART is possible to transmUART on 2, DUART channels.Packaging is based on Tube.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.The configuration uses 44 terminations.In order to operate it, a supply voltage of 5V is required.As of right now, this electronic part is in a Obsolete status.As a means of communicating data, there are 2 serial I/Os available.Mounting is done through Surface Mount.During operation, the supply voltage is set to 5V.This electronic device belongs to the 44-pin IC family.Its clock frequency is measured at 8MHz.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.The object possesses some characteristics that are similar to Configurable GPIO, Internal Oscillator, Timer/Counter.Temperatures up to 70°C are possible to operate it.When power supplies of 5V are available, it is a reliable and efficient power supply for electronic designers.SC26C92 is set as the base part number for the part.In total, there are 15 I/Os designed to transfer data.Universal asynchronous receiver-transmitter is acceptable for the supply current to reach 25mA at the highest point.
SC26C92C1A,512 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 5V
15 I/Os
SC26C92C1A,512 Applications
There are a lot of NXP USA Inc. SC26C92C1A,512 UARTs applications.
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Multimedia Systems
- Factory automation and process control
- Ethernet Network to Serial Ports
- Domestic Applications
- Handheld Terminals and Tablets
- White goods
- Network Management
- DTE for Modem Communication Systems
- Gaming Terminals